CP3 Pump Inlet Fitting

Model: 113060--- Manufactured by: Pacific Performance Engineering

$39.99

Get the most fuel flow possible from your stock CP3 pump by eliminating possible cavitation damage to CP3 pump from excessive suction required by high pressure CP3's fuel injection pump with this "high flow" PPE CP3 Pump Inlet Fitting. The key is the larger inner diameter of the PPE fitting, which allows fuel to flow 70% more efficiently than with the restrictive stock unit. With a greater volume of fuel available to it, the CP3 injection pump will be able to perform at its optimum capability.

Features:

- 70% more flow over stock

- Stainless Steel

Available in 2 hose sizes:

- 3/8

- 1/2

Applications:

- Chevy/GMC

- Dodge 6.7

Shown below is the PPE Chromoly Inlet Fitting and both the Chevy and Doge stock fittings. You can see how ours has a larger opening giving you more flow.




STOCK INLET FITTING


PPE INLET FITTING


Dodge 6.7 option: Just remove the stock O-Ring and transfer them to the PPE Inlet Fitting and you will be good to go, see image below.

SHOWN HERE INSTALLED ON A 6.7

Please call with additional questions and concerns.

*Note: Legal in California only for racing vehicles which may never be used on the highway.

** SHIPPING NOTE- All shipping is done thru UPS and requires a signature.

Delivery times vary due to credit card processing and UPS pick-up schedules: holidays and drop-offs. (This is not subject to the control of PPE.)