Adding the PPE Polaris Ranger Turbo Kit to the stock Ranger’s 904cc 3-cylinder diesel engine will raise the horsepower rating by up to 9 hp. That is a 30+% increase over the stock Ranger’s 24 hp output!
At the heart of the PPE kit, is a high quality water and oil-cooled Garrett GT1241 turbo that produces 8 to 10 psi of power giving pressure. The PPE Polaris Ranger Turbo Kit features precision TIG welded 304 Stainless Steel intake and exhaust tubes, and of the all parts/instructions necessary for an easy install. The innovative PPE design retains the factory air box and muffler. It has been fully dyno tested for optimum reliability.
As with all PPE products, you can depend on their high quality design and construction to get you to the fun and back again.
Available for: 2011 (+) Polaris Ranger Diesels
Fits ‘12-’14 but Tilt-Bed function becomes disabled.
Designed for closed course
racing vehicles. Not to be used on the street.
UPC Company Prefix: 81050502
UPC Code - 14: 00810505029990
UPC Code - 12: 810505029990 1. Breather Line2. Breather Adapter3. Breather Adapter4. Turbo Mount 304SS5. Hose Clamps (5)6. Turbo Flange Bolts (6)7. Turbo Flange Bolt8. Turbo Hose Clamps (2)9. Turbo Gasket10. Turbo Gasket11. Turbo Gasket12. Turbo13. Wastegate Cap14. Waterlines w/ Hose Clamps15. Waterlines w/ Hose Clamps16. Waterline Hose Clamps (4)17. Breather / Water / Oil Lines Hose Clamps (6)18. Breather / Water / Oil Lines Hose Clamps (4)19. Waterline Adapter 304SS20. Waterline Adapter 304SS21. Hose Clamp22. PPE Performance Silicone Hose 1 3/4”23. Intake Adapter Hoses* *Cut Stock Intake Tube to produce these piece24. Intake Adapter Hoses* *Cut Stock Intake Tube to produce these piece25. PPE Performance Silicone Hose 1 1/2”26. Intake & Exhaust Tube 304SS27. Upper turbo feed tube28. Intake & Exhaust Tube 304SS29. Intake & Exhaust Tube 304SS30. Muffler Mount 304SS31. Oil Return32. Oil Return Bolts (2)33. Muffler Bracket Bolts (2)34. Muffler Mount Bolts (2)35. Oil Feed / Return Fitting36. Oil Feed / Return Bolts (2)37. Oil Line Feed38. Oil Line Return39. Oil Feed Line Adapter for Oil Pressure Sensor40. Exhaust Heatshield Bolts* SHIPPING NOTE- All shipping is done thru UPS and requires a signature.Note: LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES THAT MAY NEVER BE USED, OR REGISTERED OR LICENSED FOR HIGHWAY OR OFF-ROAD USE.
This notice pertains to engine and vehicles which are off the public highways except where specifically noted otherwise. Federal law restricts the removal of any part of a federally required emission control system on motor vehicles. Further, many states have enacted laws which prohibit tampering with or modifying any required emission or noise control system. Vehicles which are not operated on public highways are generally exempt from most regulations, as are some special interest and pre-emission vehicles. The reader is strongly urged to check all applicable local and state laws.
Many of the parts described or listed on this website are merchandise for off-highway application only, and are tagged with the “Special Parts Notice” reproduced here:
SPECIAL PARTS NOTICE:
This part has been specifically designed for Off-Highway application only. Since the installation of this part may either impair your vehicle’s emission control performance or be uncertified under current Motor Vehicle Safety Standards, it should not be installed in a vehicle used on any street or highway. Additionally, any such application could adversely affect the warranty coverage of such an on-street or highway vehicle.
Please call with additional questions and concerns.
Note: Legal in California only for racing vehicles that may never be used or registered or licensed for use upon a highway.
** SHIPPING NOTE- All shipping is done thru UPS and requires a signature.
Delivery times vary due to credit card processing and UPS pick-up schedules: holidays and drop-offs. (This is not subject to the control of PPE.)
PPE continues to lead the way with 50 states legal environmentally friendly fuel efficient products.
Home | Contact
Pacific Performance Engineering
303 N. Placentia Fullerton, CA 92831 | Ph: (714) 985-4825 Fax: (714) 985-9907 | email@example.com
Copyright © 2012 Pacific Performance Engineering