RegisterSearchFAQMemberlistUsergroupsLog in
Reply to topic Page 1 of 1
k2500 suburban 350 to 454, 4l80e to nv4500 wiring harness
Author Message
Reply with quote
Post k2500 suburban 350 to 454, 4l80e to nv4500 wiring harness 
I have a 97 K2500 suburban/ 5.7. Three years ago I swapped in a nv4500 when my 4l80e gave out. I had a 97 k2500 donor truck so I swapped the pcm, wiring harness and floor shift np241 also. Looking for more power I found a 97 suburban with a 454. After a mild performance rebuild on the 454 it needs to replace the 350 that currently resides in front of the nv4500. The donor suburban should provide me everything except a manual flywheel for the 454 which I can get at rockauto. My question is which wiring harness do I use? Can the 350 wiring harness be used and modified for the fuel injectors or do I use the 454 wiring harness and computer and just set the trans portion of it into neutral. That wiring harness is also set up for a np243 electronic shift t-case.[img][/img][img][/img]

View user's profile Send private message
Display posts from previous:
Reply to topic Page 1 of 1
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum