I've had a marine manifold in the garage for about 3 years now, and it looks like I won't be using it. I bought it used from a seller on eBay, and I have only chemical stripped the upper plenum and the injector rails. No other work has been done to it. The bottom cast iron section is still red. It does NOT include the injectors, fuel pressure regulator, throttle body, etc. It's just the upper and lower plenum, injector rails, and the associated hardware (upper plenum bolts, injector clips, etc.). Just wanted to see if people are still interested in these, and I thought I would give first dibs to the forum before I put it on eBay.

Tried to post a large pic so the condition can be clearly seen. There is some white oxidation on one side of the upper plenum, and there is the normal rust on the cast iron lower. This should all be easily removable via media blasting, I just never got around to it.

All right, had a moment to look back at what I paid for all this and came up with an asking price. Back in Spetember 2009 I paid $200 for the upper and lower intake, $235 for the fuel rail assembly (without injectors), and another $35 for the somewhat unique injector clips this rail seems to use. So, I have $470 in the above pictured setup before any of my own paint stripping labor and materials to clean up the fuel rails and upper intake.

So, I would like to get $300 plus shipping. Seems like a good deal to me considering what I actually spent on all this. Keep in mind shipping is a little steep on these because they are rather large and surprisingly HEAVY.

PM sent.

Sorry, I should have already updated this thread, but it was sold a while back. Thanks to everyone who expressed interest.