RegisterSearchFAQMemberlistUsergroupsLog in
Search found 706 matches
Author Message
PostForum: GM Performance Forum   Posted: Thu Aug 11, 2016 4:29 pm   Subject: Changing a cab

Thanks for the replies. ...I have a forklift so the lifting part is easy. If the pcm is different then I need 1 from a 98 with a 350 in it or can I keep the complete harness from the 97?
PostForum: GM Performance Forum   Posted: Thu Aug 11, 2016 4:41 am   Subject: Changing a cab

It's been a while....sorry. I have 2 2wd the body on my 98xcab is mint but the frame and drive train notsomuch. ..the other is a 97xcab with a great frame and drivetrain. My question is how hard is it ...
PostForum: Side Garage   Posted: Mon Oct 19, 2015 7:13 pm   Subject: Load range E tires in 20 inch rim.

275 55r20 are a factory size onthe ltz. ...bfg allterrain come in an 8 ply and are good for 2600lbs each tire. The same in a 275 60r20 are good for 3000lbs each. I don't think anybody makes a 10ply... ...
PostForum: Side Garage   Posted: Tue Sep 15, 2015 5:14 pm   Subject: Tire balancing beads

Balancing beads and sand both work but there can't be any moisture in the air inside the tire as it acts like glue to the beads/sand. I prefer to us plain old antifreeze and water about 8oz worth. Mix ...
PostForum: GM Performance Forum   Posted: Tue May 26, 2015 8:51 am   Subject: new to me ride

Towing my 78 malibu on my open carhauler. 4.8 in the 02 handles it without issue but i figured the 6L would be that much better lol
PostForum: GM Performance Forum   Posted: Mon May 25, 2015 4:03 pm   Subject: new to me ride

Coolio I'll keep you posted
PostForum: GM Performance Forum   Posted: Sat May 23, 2015 5:42 pm   Subject: new to me ride

Just purchased an 05 2500hd 6liter quad cab 8foot box tow vehicle with 140000 miles. No power options rubber floor mats etc. Seems ok so far only put 100miles or so on it....definitely needs cruze con ...
PostForum: GM Performance Forum   Posted: Tue Jan 06, 2015 5:50 am   Subject: big pyle of parts

Your heads not having egr ports isn't a big deal. The truck has to pass a visual inspection so an egr valve has to be bolted to the intake but it doesn't have to function as long as the truck can pass ...
PostForum: GM Performance Forum   Posted: Mon Jan 05, 2015 6:07 pm   Subject: Vortec 400sbc?

Im debating on a 150shot so the wifie and i can run 2 classes....let her run pro and i run superpro. ...her 3rd pass ever on a dragstrip she run a 12.62 at 103 comes back to the pit and says theres so ...
PostForum: GM Performance Forum   Posted: Mon Jan 05, 2015 6:01 pm   Subject: Vortec 400sbc?

Stock 906 vortecs off a 100000 mile work done even stock springs.....i had 4.56s in it and it pulled 6800 thru the traps but ran the exact same times so i went back to 3.73s so i wouldn't ...
PostForum: GM Performance Forum   Posted: Mon Jan 05, 2015 5:21 pm   Subject: Vortec 400sbc?

I never even bothered to drill the steam holes just bolted them issues overheating and its sat idling in staging for a half hour or more and has never crested 180 degrees
PostForum: GM Performance Forum   Posted: Mon Jan 05, 2015 5:15 pm   Subject: Vortec 400sbc?

I have 1 in my 78 malibu bracket car....runs 12.50s stock heads 465 /488 summit cam 30over with flattops. 3500 converter with 3.73s and a 28"slick. ...wifie leaves it in drive and runs 12.6s at 1 ...
PostForum: GM Performance Forum   Posted: Mon Dec 29, 2014 3:50 pm   Subject: front diff

Coolio....i do my own internal diff work and have set up alot....never had 1of these bad boys out tho....was hoping it was a direct bolt in but i guess not lol.
Thanks for the info
PostForum: GM Performance Forum   Posted: Mon Dec 29, 2014 12:08 pm   Subject: front diff

question. ...will the front diff from a 98 fit in an 02 providing gear ratios are front diff is spewing oil after 345000km and my old partstruck is still decent...if not how hard is it ...
PostForum: GM Performance Forum   Posted: Wed Aug 21, 2013 4:56 pm   Subject: cab change

Thanks for the insight guys it sounds a little bit more complicated than the cab on my old 79 lol
PostForum: GM Performance Forum   Posted: Sun Aug 18, 2013 6:34 pm   Subject: cab change

98 is a 305 97 is a 350....i probably should keep the computer with the 350
PostForum: GM Performance Forum   Posted: Sat Aug 17, 2013 11:01 am   Subject: cab change

I am the owner of both vin numbers. ..1 cab is rusty the other is mint with a bent frame....i shud just be able to switch the plates over at the dmv without issue...hopefully lol.....Lorne
PostForum: GM Performance Forum   Posted: Fri Aug 16, 2013 7:07 pm   Subject: cab change

How hard is it to change the cab from a 97 to a 98? Both are excabs and should bolt rite up my concerns are with security modules and any other computer issues that i might have.....thks for any input ...
PostForum: Side Garage   Posted: Tue Aug 13, 2013 3:10 pm   Subject: 2002 Malibu problem... UNSOLVED!!!!

If the balancer has slipped it won't run the crank sensor gets damaged....some of the older fwd pontiacs had a ground issue. Engineers had a ground strap for the pcm in the drivers kick panel and it u ...
PostForum: Side Garage   Posted: Tue Aug 13, 2013 3:59 am   Subject: 2002 Malibu problem... UNSOLVED!!!!

Some of the chevy v6s had issues with the harmonic balancer rubber slipping and causing the pickup for the crank sensor to move
Page 1 of 36 Goto page 1, 2, 3 ... 34, 35, 36  Next
All times are GMT - 8 Hours